These window deflectors will fit all Peterbilt doors 2005 and older including 377, 378, 359, and the 379. They not only look good. They also serve a purpose. They will do a wonderful job deflecting the wind and rain if you like to keep your window cracked open a little. They are made of quality, highly polished stainless steel and come as a pair.

• Peterbilt 2005 & older
• Stainless steel
• Pair
• MADE IN USA

Made of high polished stainless steel, these logo trims will really set your truck off. Watch those heads turn when you drive by with these beauties attached to your Peterbilt hood. Called "racing stripes", these logo trims will make your truck look lightning fast! Sold as a pair

• Stainless steel
• Sold as pair
• MADE IN USA

need pic
 

These high polished stainless steel hood panels will add a touch of class to your Peterbilt 379. They will fit the extended hood Peterbilt 379. Notice, in the picture, that they incorporate the slick use of divots to cover the rivet spots on the truck instead of having holes that show the rivets.  Tape mount.  Pair

• Peterbilt 379 extended hood
• Stainless Steel
• Tape mount
• Divots to cover the rivets
• Pair
• MADE IN USA

If I was putting train horns on a truck these are the ones I would use every time. These things are loud! (140+ decibels) They have an extra brace to support the bigger (bottom two) trumpets so that they will have a long life. Unlike the lower cost horns, replacement diaphragms are available for these. I would be happy to sell the lower cost horns to you if that is what you are looking for, but would strongly recommend these horns. These should be hooked up using 3/8" airline. They come with a solenoid for hooking them directly to air (without the need of a valve). You would need to supply your own electrical switch to activate the solenoid. You may want to use a chrome valve stand instead of the solenoid to activate the horns.  The chrome train horn valve can be found here

• Best quality
• 140+ decibel
• Brace to support lower horns
• Solenoid included
• Compatible with valve if you rather use it

This Roadster style 13 diode 2 1/2" LED takes a standard 2 prong male plug. It fits the standard 2 1/2" grommet. It is available in amber or red lens and of course amber or red LEDs.

• 2.5"
• 13 diode
• Amber or red lens
• LED color amber or red
• Roadster style
• Fits standard 2.5" grommet
• Takes standard 2 prong male plug

NOTE: There are 2 possible hole sizes to mount a 2.5" grommet mount light. The grommet is what determines what hole size is needed. Some of the grommets require a 2.75" hole while others require a 3" hole. No matter which grommet you are using, this light will work.

united pacific
38174 ua38174 up38174 38174ua 38174up 38174
38175 ua38175 up38175 38175ua 38175up 38175

This 2x6 LED has a double .180 pigtail plug. It is a surface mount light. It is available in amber, red, or clear lens and of course amber or red LEDs. The lens is actually a reflector. It has 16 diodes

• 2" X 6"
• 16 diode
• Dual .180 plugs
• Amber, red, or clear lens
• LED color amber or red

NOTE: This light is commonly referred as a turtle back light

united pacific
ua38253 up38253 38253ua 38253up 38253
ua38254 up38254 38254ua 38254up 38254
ua38320 up38320 38320ua 38320up 38320
ua38321 up38321 38321ua 38321up 38321

turtleback

This 4 diode 2 1/2" LED takes a standard 2 prong male plug. It fits the standard 2 1/2" grommet. It is available in amber or red lens and of course amber or red LEDs. This is a thin LED. The housing is 7/8" thick.

• 2.5"
• 4 diode
• Amber or red lens
• LED color amber or red
• Flat lens
• Fits standard 2" grommet
• Takes standard 2 prong male plug
• 7/8" thick housing

NOTE: There are 2 possible hole sizes to mount a 2.5" grommet mount light. The grommet is what determines what hole size is needed. Some of the grommets require a 2.75" hole while others require a 3" hole. No matter which grommet you are using, this light will work

united pacific
38465 ua38465 up38465 38465ua 38465up 38465 15301
38466 ua38466 up38466 38466ua 38466up 38466 15302