Gearshift floor plate trims around the shifter boot on Freightliner Classic and FLD.  This includes FLD 112 AND FLD 120.  It is made of high polished stainless steel.

• Fits Freightliner Classic and FLD
• Stainless Steel
• Trims around shift boot

UA10948 UP10948 10948 10948UA 10948UP 9547
united pacific

This holding rim is used to mount a 4" LED without using a grommet.  It has 3 bolt holes for mounting.  It is a very nice way to change the lights on the back of your sleeper to LED.

• 4"
• Stainless Steel
• Only certain lights fit this item

NOTE:  Only certain lights will fit this holding rim.  It is best if you phone us and find out which lights are currently working with it.  If a person orders this rim and also some 4" LEDs, we will try to phone the customer if the two do not mate well.

20549up 20549 ua20549 up20549

This plate will trim around your shifter boot on your Peterbilt. It is made to cover the black plastic one from the factory. No hardware is required. It sticks to the stock part with double sided tape so that no bolt heads show. It is very slick looking. It is very important that you measure the opening size and location on your factory one and compare it to the ones on our web store. There are six different hole layouts so please check carefully before ordering

• Peterbilt
• Stainless steel
• Covers factory part
• No hardware needed
• Check the dimensions on our site before ordering

This shifter plate trim has a hole size of 5 3/4" X 4 7/8" that is setback from the leading edge of the part 3 15/16".

need pics

This plate will trim around your shifter boot on your Peterbilt. It is made to cover the black plastic one from the factory. No hardware is required. It sticks to the stock part with double sided tape so that no bolt heads show. It is very slick looking. It is very important that you measure the opening size and location on your factory one and compare it to the ones on our web store. There are six different hole layouts so please check carefully before ordering

• Peterbilt
• Stainless steel
• Covers factory part
• No hardware needed
• Check the dimensions on our site before ordering

This shifter plate trim has a hole size of 5 3/4"" X 4 7/8" that is setback from the leading edge of the part 2 9/16".

need pics

UA21731 UP21731 21731UA 21731UP 21731 9881

This plate will trim around your shifter boot on your Peterbilt. It is made to cover the black plastic one from the factory. No hardware is required. It sticks to the stock part with double sided tape so that no bolt heads show. It is very slick looking. It is very important that you measure the opening size and location on your factory one and compare it to the ones on our web store. There are six different hole layouts so please check carefully before ordering

• Peterbilt
• Stainless steel
• Covers factory part
• No hardware needed
• Check the dimensions on our site before ordering

This shifter plate trim has a hole size of 5 3/4" X 4 3/4" that is setback from the leading edge of the part 4 5/8".

need pics

UA21732 UP21732 21732UA 21732UP 21732 9882

This plate will trim around your shifter boot on your Peterbilt. It is made to cover the black plastic one from the factory. No hardware is required. It sticks to the stock part with double sided tape so that no bolt heads show. It is very slick looking. It is very important that you measure the opening size and location on your factory one and compare it to the ones on our web store. There are six different hole layouts so please check carefully before ordering

• Peterbilt
• Stainless steel
• Covers factory part
• No hardware needed
• Check the dimensions on our site before ordering

This shifter plate trim has a hole size of 4 7/8"" X 4 13/16"" that is setback from the leading edge of the part 7 7/8".

need pics

UA21733 UP21733 21733UA 21733UP 21733 9883

This plate will trim around your shifter boot on your Peterbilt. It is made to cover the black plastic one from the factory. No hardware is required. It sticks to the stock part with double sided tape so that no bolt heads show. It is very slick looking. It is very important that you measure the opening size and location on your factory one and compare it to the ones on our web store. There are six different hole layouts so please check carefully before ordering

• Peterbilt
• Stainless steel
• Covers factory part
• No hardware needed
• Check the dimensions on our site before ordering

This shifter plate trim has a hole size of 4 3/4"" X 4 3/4" that is setback from the leading edge of the part 3 13/16".

need pic

UA21734 UP21734 21734UA 21734UP 21734 9884

This plate will trim around your shifter boot on your Peterbilt. It is made to cover the black plastic one from the factory. No hardware is required. It sticks to the stock part with double sided tape so that no bolt heads show. It is very slick looking. It is very important that you measure the opening size and location on your factory one and compare it to the ones on our web store. There are six different hole layouts so please check carefully before ordering

• Peterbilt
• Stainless steel
• Covers factory part
• No hardware needed
• Check the dimensions on our site before ordering

This shifter plate trim has a hole size of 5 3/4"" X 4 7/8" that is setback from the leading edge of the part 5 7/8".

need pics

UA21735 UP21735 21735UA 21735UP 21735 14062