This plate will trim around your shifter boot on your Peterbilt. It is made to cover the black plastic one from the factory. No hardware is required. It sticks to the stock part with double sided tape so that no bolt heads show. It is very slick looking. It is very important that you measure the opening size and location on your factory one and compare it to the ones on our web store. There are six different hole layouts so please check carefully before ordering

• Peterbilt
• Stainless steel
• Covers factory part
• No hardware needed
• Check the dimensions on our site before ordering

This shifter plate trim has a hole size of 5 3/4" X 4 7/8" that is setback from the leading edge of the part 3 15/16".

need pics

This plate will trim around your shifter boot on your Peterbilt. It is made to cover the black plastic one from the factory. No hardware is required. It sticks to the stock part with double sided tape so that no bolt heads show. It is very slick looking. It is very important that you measure the opening size and location on your factory one and compare it to the ones on our web store. There are six different hole layouts so please check carefully before ordering

• Peterbilt
• Stainless steel
• Covers factory part
• No hardware needed
• Check the dimensions on our site before ordering

This shifter plate trim has a hole size of 5 3/4"" X 4 7/8" that is setback from the leading edge of the part 2 9/16".

need pics

UA21731 UP21731 21731UA 21731UP 21731 9881

This plate will trim around your shifter boot on your Peterbilt. It is made to cover the black plastic one from the factory. No hardware is required. It sticks to the stock part with double sided tape so that no bolt heads show. It is very slick looking. It is very important that you measure the opening size and location on your factory one and compare it to the ones on our web store. There are six different hole layouts so please check carefully before ordering

• Peterbilt
• Stainless steel
• Covers factory part
• No hardware needed
• Check the dimensions on our site before ordering

This shifter plate trim has a hole size of 5 3/4" X 4 3/4" that is setback from the leading edge of the part 4 5/8".

need pics

UA21732 UP21732 21732UA 21732UP 21732 9882

This plate will trim around your shifter boot on your Peterbilt. It is made to cover the black plastic one from the factory. No hardware is required. It sticks to the stock part with double sided tape so that no bolt heads show. It is very slick looking. It is very important that you measure the opening size and location on your factory one and compare it to the ones on our web store. There are six different hole layouts so please check carefully before ordering

• Peterbilt
• Stainless steel
• Covers factory part
• No hardware needed
• Check the dimensions on our site before ordering

This shifter plate trim has a hole size of 4 7/8"" X 4 13/16"" that is setback from the leading edge of the part 7 7/8".

need pics

UA21733 UP21733 21733UA 21733UP 21733 9883

This plate will trim around your shifter boot on your Peterbilt. It is made to cover the black plastic one from the factory. No hardware is required. It sticks to the stock part with double sided tape so that no bolt heads show. It is very slick looking. It is very important that you measure the opening size and location on your factory one and compare it to the ones on our web store. There are six different hole layouts so please check carefully before ordering

• Peterbilt
• Stainless steel
• Covers factory part
• No hardware needed
• Check the dimensions on our site before ordering

This shifter plate trim has a hole size of 4 3/4"" X 4 3/4" that is setback from the leading edge of the part 3 13/16".

need pic

UA21734 UP21734 21734UA 21734UP 21734 9884

This plate will trim around your shifter boot on your Peterbilt. It is made to cover the black plastic one from the factory. No hardware is required. It sticks to the stock part with double sided tape so that no bolt heads show. It is very slick looking. It is very important that you measure the opening size and location on your factory one and compare it to the ones on our web store. There are six different hole layouts so please check carefully before ordering

• Peterbilt
• Stainless steel
• Covers factory part
• No hardware needed
• Check the dimensions on our site before ordering

This shifter plate trim has a hole size of 5 3/4"" X 4 7/8" that is setback from the leading edge of the part 5 7/8".

need pics

UA21735 UP21735 21735UA 21735UP 21735 14062

This gauge cover set will cover the bezels on the 3 gauges that are to the left of the speedometer and tachometer on Peterbilt dashes that are 2006 and newer.

• Peterbilt 2006 and newer
• Visored
• Chrome finish
• Fits 3 small gauges in the center dash panel
• Left hand

need pic (large)
 

This gauge cover set will cover the bezels on the 3 gauges that are to the right of the speedometer and tachometer on Peterbilt dashes that are 2006 and newer.

• Peterbilt 2006 and newer
• Visored
• Chrome finish
• Fits 3 small gauges in the center dash panel
• Right hand